1-415-230-4353

Brocade GS Series Switches

The FastIron GS Series are compact Power over Ethernet (PoE) networking switches designed for flexible convergence solutions at the network edge.

FastIron GS series is available in PoE ready and PoE upgradeable models. The PoE upgradeable models support 20 or 44 10/100/1000 Mbps RJ45 ports plus 4 combo copper/fiber Gigabit Ethernet ports supporting 10/100/1000 Mbps (RJ45) or 100/1000 Mbps Ethernet Fiber (SFP) connectivity. The PoE ready models support 20 or 44 10/100/1000 Mbps RJ45 802.3af PoE ports plus 4 combo copper/fiber Gigabit Ethernet ports supporting 10/100/1000 Mbps (RJ45) 802.3af PoE or 100/1000 Mbps Ethernet Fiber (SFP) connectivity. In addition, the FastIron GS Series switches support an optional field- upgradeable 2-port 10GbE module for converged 10/100/1000 Mbps network access solutions and the flexibility to support 10-GigE. The FastIron GS624XGP models include an additional factory installed 10GbE XFP port for high density 10GbE.

The PoE upgradeable models are field-upgradeable to support PoE providing a flexible solution for customers that want to upgrade to PoE after deployment. In addition, the FastIron GS series can be field-upgraded to support IronStack, Foundry’s stacking solution. With IronStack, up to 8 FastIron GS series switches can be stacked together operating as a single logical chassis. IronStack supports both PoE and non-POE units in a single stack, providing greater deployment flexibility to customers.

The FastIron GS Series switches deliver advanced Layer 2, Base Layer 3 and Edge Layer 3 (EdgePREM) features based on the company’s field-proven IronWare networking software. Base Layer 3 features include IPv4 static routes, RIP route advertisement, VRRP, virtual and routed interfaces, ECMP and DHCP relay. EdgePREM software includes IPv4 routing features such as OSFP and RIPv1/v2 in addition to features supported in Base Layer 3. The EdgePREM software can either be pre-installed or can be upgraded in the field via the EdgePREM upgrade kit.

IronStack enabled switches support Layer 2 and Base Layer 3 software features. The EdgePREM software is not available on IronStack enabled/upgraded switches.

All units ship with a console cable and US power cord unless otherwise specified at time of order. All orders include one (1) modular AC power supply, manual on CD-ROM and rack mount kit. Pluggable 10-GbE modules, SFP and XFP optics and additional CX4 cables are optional and must be purchased separately.

Part Number Description

CX4 Cable for use with 10GbE CX4 ports. Distance is 50cm or 0.5m.

FastIron GS field installable 1-port CX4 10 Gigabit Ethernet and 1-port XFP 10 Gigabit Ethernet module. Applicable only for the FastIron GS series products.

POE Add-in DIMM provides power for 24 ports of 10/100/1000._ Used with the FGS624P, FGSXGP, and FGS648P and respective DC versions. The FGS648P requires 2 POE DIMMs to enable all 48-ports for POE.

FastIron GS field installable 2-port XFP 10 Gigabit Ethernet module. Applicable only for the FastIron GS series products.

FastIron GS field installable 2-port CX4 10 Gigabit Ethernet module. This module includes two integral CX4 Transceivers and ships with one .5m CX4 cable. Applicable only for the FastIron GS series products.

Edge Layer 3 software upgrade for the FGS624 PoE and non-PoE models, FGS624XGP PoE and non-PoE models and the FLS624. Edge Layer 3 includes IPv4 routing protocols RIPv1/v2 and OSPF.

Edge Layer 3 software upgrade for the FGS648 PoE and non-PoE models, and the FLS648. Edge Layer 3 includes IPv4 routing protocols RIPv1/v2 and OSPF.

FastIron GS 624P includes 24-port 10/100/1000 with 4-port Combo copper/fiber Gigabit Ethernet ports for use with 10/100/1000 Mbps (RJ45) or 100/1000 Mbps Ethernet Fiber (SFP) connectivity and one modular AC power supply. Unit can be upgraded to support 802.3af PoE with the addition of a PoE DIMM (Part # FGS-24GCPOE). Unit includes an open slot for an optional 2-port 10 Gigabit Ethernet module.

FastIron GS 624P includes 24-port 10/100/1000 with 4-port Combo copper/fiber Gigabit Ethernet ports for use with 10/100/1000 Mbps (RJ45) or 100/1000 Mbps Ethernet Fiber (SFP) connectivity and one modular DC power supply. Unit can be upgraded to support 802.3af PoE with the addition of a PoE DIMM (Part # FGS-24GCPOE). Unit includes an open slot for an optional 2-port 10 Gigabit Ethernet module.

FastIron GS 624P-DC-EPREM includes 20 x 10/100/1000 Mbps ports plus 4 Combo copper/fiber Gigabit Ethernet ports supporting 10/100/1000 Mbps copper (RJ45) or 100/1000 Ethernet Fiber (SFP) connectivity and one modular DC power supply. The switch can be upgraded to support 802.3af PoE with the addition of a PoE DIMM (Part # FGS-24GCPOE). The switch ships with EdgePREM IronWare software upgrade

FastIron GS 624P-DC-STK includes 20-port 10/100/1000 plus 4-port Combo copper/fiber Gigabit Ethernet ports for use with 10/100/1000 Mbps (RJ45) or 100/1000 Mbps Ethernet Fiber (SFP) connectivity and one modular DC power supply. The unit comes with factory installed two port CX4 module, stacking EEPROM and 256 MB of CPU memory. Unit can be upgraded to support 802.3af PoE with the addition of a PoE DIMM (Part # FGS-24GCPOE)._ Unit ships with one 0.5m CX4 cable and a CD that includes stacking software, installation and configuration guides.

FastIron GS 624P-EPREM includes 20 x 10/100/1000 Mbps ports plus 4 Combo copper/fiber Gigabit Ethernet ports supporting 10/100/1000 Mbps copper (RJ45) or 100/1000 Ethernet Fiber (SFP) connectivity and one modular AC power supply. The switch can be upgraded to support 802.3af PoE with the addition of a PoE DIMM (Part # FGS-24GCPOE). The switch ships with EdgePREM IronWare software upgrade

FastIron GS 624P-POE includes 24-port 10/100/1000 with 4-port Combo copper/fiber Gigabit Ethernet ports for use with 10/100/1000 Mbps (RJ45) or 100/1000 Mbps Ethernet Fiber (SFP) connectivity and one modular AC power supply. Unit supports 802.3af PoE. Unit includes an open slot for an optional 2-port 10 Gigabit Ethernet module.

FastIron GS 624P-POE-DC includes 24-port 10/100/1000 with 4-port Combo copper/fiber Gigabit Ethernet ports for use with 10/100/1000 Mbps (RJ45) or 100/1000 Mbps Ethernet Fiber (SFP) connectivity and one modular DC power supply. Unit supports 802.3af PoE. Unit includes an open slot for an optional 2-port 10 Gigabit Ethernet module.

FastIron GS 624P-POE-DC-EPREM includes 20 x 10/100/1000 Mbps 802.3af PoE ports plus 4 Combo copper/fiber Gigabit Ethernet ports supporting 10/100/1000 Mbps 802.3af PoE copper (RJ45) or 100/1000 Ethernet Fiber (SFP) connectivity and one modular DC power supply. The switch ships with EdgePREM IronWare software upgrade

FastIron GS 624P-POE-DC-STK includes 20-port 10/100/1000 802.3af plus 4-port Combo copper/fiber Gigabit Ethernet ports for use with 10/100/1000 Mbps 802.3af (RJ45) or 100/1000 Mbps Ethernet Fiber (SFP) connectivity and one modular DC power supply._ The unit comes with factory installed two port CX4 module, stacking EEPROM and 256 MB of CPU memory. Unit ships with one 0.5m CX4 cable and a CD that includes stacking software, installation and configuration guides.

FastIron GS 624P-POE-EPREM includes 20 x 10/100/1000 Mbps 802.3af PoE ports plus 4 Combo copper/fiber Gigabit Ethernet ports supporting 10/100/1000 Mbps 802.3af PoE copper (RJ45) or 100/1000 Ethernet Fiber (SFP) connectivity and one modular AC power supply. The switch ships with EdgePREM IronWare software upgrade

FastIron GS 624P-POE-STK includes 20-port 10/100/1000 802.3af plus 4-port Combo copper/fiber Gigabit Ethernet ports for use with 10/100/1000 Mbps 802.3af (RJ45) or 100/1000 Mbps Ethernet Fiber (SFP) connectivity and one modular AC power supply._ The unit comes with factory installed two port CX4 module, stacking EEPROM and 256 MB of CPU memory. Unit ships with one 0.5m CX4 cable and a CD that includes stacking software, installation and configuration guides.

FastIron GS 624P-STK includes 20-port 10/100/1000 plus 4-port Combo copper/fiber Gigabit Ethernet ports for use with 10/100/1000 Mbps (RJ45) or 100/1000 Mbps Ethernet Fiber (SFP) connectivity and one modular AC power supply._ The unit comes with factory installed two port CX4 module, stacking EEPROM and 256 MB of CPU memory. Unit can be upgraded to support 802.3af PoE with the addition of a PoE DIMM (Part # FGS-24GCPOE). Unit ships with one 0.5m CX4 cable and a CD that includes stacking software, installation and configuration guides.

FastIron GS624P-STK-CXU upgrade kit includes one 2-port 10GbE CX4 module, 256 MB memory (memory upgrade), EEPROM (to enable stacking), one 0.5m CX4 cable, and a CD that includes stacking software, installation and configuration guides.

FastIron GS624P-STK-U Upgrade kit includes 256 MB memory (memory upgrade), EEPROM (to enable stacking), upgrade kit installation guide and a CD that includes stacking software, installation and configuration guides.

FastIron GS 648P includes 48-port 10/100/1000 with 4-port Combo copper/fiber Gigabit Ethernet ports for use with 10/100/1000 Mbps (RJ45) or 100/1000 Mbps Ethernet Fiber (SFP) connectivity and one modular AC power supply. Unit can be upgraded to support 802.3af PoE with the addition of two PoE DIMMs (Part # FGS-24GCPOE). Unit includes an open slot for an optional 2-port 10 Gigabit Ethernet module.

FastIron GS 648P includes 48-port 10/100/1000 with 4-port Combo copper/fiber Gigabit Ethernet ports for use with 10/100/1000 Mbps (RJ45) or 100/1000 Mbps Ethernet Fiber (SFP) connectivity and one modular DC power supply. Unit can be upgraded to support 802.3af PoE with the addition of two PoE DIMM (Part # FGS-24GCPOE). Unit includes an open slot for an optional 2-port 10 Gigabit Ethernet module.

FastIron GS 648P-DC-EPREM includes 44 x 10/100/1000 Mbps ports plus 4 Combo copper/fiber Gigabit Ethernet ports supporting 10/100/1000 Mbps (RJ45) or 100/1000 Mbps Ethernet Fiber (SFP) connectivity and one modular DC power supply. The switch can be upgraded to support 802.3af PoE with the addition of two PoE DIMM (Part # FGS-24GCPOE). The switch ships with EdgePREM IronWare software upgrade

FastIron GS 648P-DC-STK includes 44-port 10/100/1000 plus 4-port Combo copper/fiber Gigabit Ethernet ports for use with 10/100/1000 Mbps (RJ45) or 100/1000 Mbps Ethernet Fiber (SFP) connectivity and one modular DC power supply. The unit comes with factory installed two port CX4 module, stacking EEPROM and 256 MB of CPU memory. Unit can be upgraded to support 802.3af PoE with the addition of two PoE DIMM (Part # FGS-24GCPOE). Unit ships with one 0.5m CX4 cable and a CD that includes stacking software, installation and configuration guides.

FastIron GS 648P-EPREM includes 44 x 10/100/1000 Mbps ports plus 4 Combo copper/fiber Gigabit Ethernet ports supporting 10/100/1000 Mbps (RJ45) or 100/1000 Mbps Ethernet Fiber (SFP) connectivity and one modular AC power supply. The switch can be upgraded to support 802.3af PoE with the addition of two PoE DIMM (Part # FGS-24GCPOE). The switch ships with EdgePREM IronWare software upgrade

FastIron GS 648P-POE includes 48-port 10/100/1000 with 4-port Combo copper/fiber Gigabit Ethernet ports for use with 10/100/1000 Mbps (RJ45) or 100/1000 Mbps Ethernet Fiber (SFP) connectivity one modular AC power supply. Unit supports 802.3af PoE. Unit includes an open slot for an optional 2-port 10 Gigabit Ethernet module.

FastIron GS 648P-POE includes 48-port 10/100/1000 with 4-port Combo copper/fiber Gigabit Ethernet ports for use with 10/100/1000 Mbps (RJ45) or 100/1000 Mbps Ethernet Fiber (SFP) connectivity one modular DC power supply. Unit supports 802.3af PoE. Unit includes an open slot for an optional 2-port 10 Gigabit Ethernet module.

FastIron GS 648P-POE-DC-EPREM includes 44 x 10/100/1000 Mbps 802.3 PoE ports plus 4 Combo copper/fiber Gigabit Ethernet ports supporting 10/100/1000 Mbps 802.3af PoE (RJ45) or 100/1000 Ethernet Fiber (SFP) connectivity and one modular DC power supply. The switch ships with EdgePREM IronWare software upgrade

FastIron GS 624P-POE-DC-STK includes 44-port 10/100/1000 802.3af plus 4-port Combo copper/fiber Gigabit Ethernet ports for use with 10/100/1000 Mbps 802.3af (RJ45) or 100/1000 Mbps Ethernet Fiber (SFP) connectivity and one modular DC power supply. The unit comes with factory installed two port CX4 module, stacking EEPROM and 256 MB of CPU memory. Unit ships with one 0.5m CX4 cable and a CD that includes stacking software, installation and configuration guides.

FastIron GS 648P-POE-EPREM includes 44 x 10/100/1000 Mbps 802.3 PoE ports plus 4 Combo copper/fiber Gigabit Ethernet ports supporting 10/100/1000 Mbps 802.3af PoE (RJ45) or 100/1000 Ethernet Fiber (SFP) connectivity and one modular AC power supply. The switch ships with EdgePREM IronWare software upgrade

FastIron GS 648P-POE-STK includes 44-port 10/100/1000 802.3af plus 4-port Combo copper/fiber Gigabit Ethernet ports for use with 10/100/1000 Mbps 802.3af (RJ45) or 100/1000 Mbps Ethernet Fiber (SFP) connectivity and one modular AC power supply. The unit comes with factory installed two port CX4 module, stacking EEPROM and 256 MB of CPU memory. Unit ships with one 0.5m CX4 cable and a CD that includes stacking software, installation and configuration guides.

FastIron GS 648P-STK includes 44-port 10/100/1000 plus 4-port Combo copper/fiber Gigabit Ethernet ports for use with 10/100/1000 Mbps (RJ45) or 100/1000 Mbps Ethernet Fiber (SFP) connectivity and one modular AC power supply. The unit comes with factory installed two port CX4 module, stacking EEPROM and 256 MB of CPU memory. Unit can be upgraded to support 802.3af PoE with the addition of two PoE DIMM (Part # FGS-24GCPOE). Unit ships with one 0.5m CX4 cable and a CD that includes stacking software, installation and configuration guides.

FastIron GS648P-STK-CXU upgrade kit includes one 2-port 10GbE CX4 module,_256 MB memory (memory upgrade), EEPROM (to enable stacking), one 0.5m CX4 cable, upgrade kit installation guide and a CD that includes stacking software, installation and configuration guides.

FastIron GS648P-STK-U Upgrade kit includes 256 MB memory (memory upgrade),_ EEPROM (to enable stacking), upgrade kit installation guide and a CD that includes stacking software, installation and configuration guides.

600W, AC power supply for FGS624P, FGS648P, FGS624P-POE, FGS648P-POE and respective AC versions only

600W DC Power Supply for FES-POE models, FESX448/648 models, FESX424-POE models and FastIron GS models (POE and non-POE)

600W, DC power supply for FGS624P, FGS648P, FGS624P-POE, FGS648P-POE and respective DC versions only

Terabit systems advantage

Industry leading Customer Service
Cost Recovery Specialists
Bullet Proof Warranty

Terabit Systems is more than a supplier of top-quality networking hardware. We are a customer-centered business that strives to provide you the best, hassle-free customer service in the network hardware industry. It’s simple, you have enough going on managing your day to day network operations. The experience of buying hardware should not be something you dread. You will enjoy working with our San Francisco-based Networking Specialists and look at buying networking hardware in a whole new light.

In addition to the savings you receive buying refurbished equipment, we also help extend your budget with our asset recovery/hardware re-marketing services. If you have surplus gear or are switching platforms, we can help lower your total cost of ownership by buying your unused or used networking equipment and offering fair-market value or trade-in on your new networking equipment. Give us a call to set up a free audit of your gear.

We make purchasing networking hardware simple for you. If anything goes wrong within the first year, we will replace it or offer a full refund. Simple enough? Our rigorous testing procedures allow us to certify our equipment with rock solid warranties. Our tight shipping process ensures it arrives safely – on time.

Our team

Better service. Complete solutions. Real people. That’s what sets us apart.

Charles
Solution Specialist

We are way more than simply moving part numbers.

Rozanna
Sales Associate

With Terabit it’s not about price. It’s about balancing clients’ needs with how much they can afford and guiding them to the solution.

Charles
Solution Specialist

It still has that new card smell.

Joe
Marketing Manager

Nothing feels better than being the hero who can ship a piece of gear the same day and keep a network running.

Daniel
Account Executive

Used does not mean less capable. As soon as gear is plugged in it becomes “used”, much like a brand new car driving off the lot.

Brian
General Manager

If you’re happy, we’re happy. If not, call us and we’ll make it right.

Raul
Senior Sales Associate

When the fans kick on 100% and traffic is flowing through the ports, I get a kind of rush.

Dave
Technical Director

BLOG

October 22, 2024
Line of switches at Terabit Systems LLC

Startups and established businesses alike need scalable, powerful and manageable network infrastructure to be competitive. Used network hardware from brands like Arista, Juniper, and Cisco provide an excellent opportunity to deploy Layer 2 and Layer 3 Ethernet switching and routing hardware for...